Product Support
High Power Wireless-300N Smart Repeater (SR150)

High Power Wireless-150N Range Extender
(Smart Repeater)
SR150

Extend the Range of your Wi-Fi Network

Browse the selections below to view support materials and
troubleshooting tips. FAQs provide you with answers to frequently
asked questions. The Download section provides you with firmware
upgrades or device drivers and other related software. To view
the User's Guide for your product check out the Documentation section.
If you are having problems finding what you need, contact us.

 
Items
Date
Setup Guide Setup Guide (English) 6/1/2012
Setup Guide Setup Guide (Spanish) 9/7/2012
User's Guide User's Guide 6/1/2012
Datasheet Datasheet 6/1/2012
 
Items
Notes
Date
Firmware Firmware Download and unzip. View Read Me.txt 12/25/2012
   
Recent Updates
  • Added stability for Apple AirPrint, AirPlay and Home Sharing
  • Updated web menu text and diagrams
  • Increased User Access (MAC Address Filtering) entries from 20 to 40
  • Reduced wait time between setting changes on the web menu
   

Important:
Before upgrading firmware, always save your current settings from the Save/Reload Settings page.

To access from the web menu:
More Settings > Management > Save/Reload Settings > Save Settings to File
After the firmware updates, load your saved settings to keep your existing configurations.
 
Troubleshooting

The tips in this guide are listed in order of relevance. Try solution (a) before trying solution (b) etc...
I entered setup.ampedwireless.com and it failed to open the setup menu.
  1. Make sure your computer is NOT connected to any WiFi Networks
    1. Disconnect from your WiFi network [More Information]
      Windows 7
      Click on the Signal bars icon on the bottom right hand corner of your screen. If you are connect to any WiFi networks, click on the connected network then click disconnect.

      Windows 7
      Windows XP
      Click on the Wireless Network Adapter icon on the bottom right hand corner of your screen. If you are connect to any WiFi networks, click on the connected network then click disconnect.

      Windows XP
      Mac
      Click on the Airport Icon, if your Airport is on then click on Turn Airport Off

      Mac
      Windows Vista
      Click on the Wireless Network Adapter icon on the bottom right hand corner of your screen. If you are connect to any WiFi networks, click on the connected network then click disconnect.

      Windows Vista

    2. Make sure your Smart Repeater is connected to your computer with an Ethernet cable
    3. Reboot the Smart Repeater by unplugging the power and plugging it back in
    4. Wait 2 minutes, type setup.ampedwireless.com into your web browser's address bar.
  2. Make sure your computer is connected to the Smart Repeater using the included Ethernet cable. Do not try to connect with a wireless connection. Ensure that the power on the Smart Repeater is on.
  3. Try to use a different web browser. We recommend the Google Chrome web browser.
  4. Try to open your web browser to the default IP address by putting this number into your web browser instead: 192.168.1.240
  5. Make sure your network adapter is set to automatically obtain an IP
  6. Power off (unplug the power adapter) the Smart Repeater and power it back on. Try again.
  7. Reset your Smart Repeater to default settings by holding the Reset Button (located on the back panel) for ten (10) seconds and try again.
I cannot connect to my Home Network. I received an Error when running the Smart Setup Wizard.
  1. Your Home Network may be secured. Double check that you have the correct security key to connect to the Home Network.
  2. Try adjusting the channel number of your Home Network's router to channel 5 thru 11. Then attempt the Smart Setup Wizard again.
  3. Check to see that your Home Network router's DHCP server is enabled. The Smart Repeater needs to obtain an IP from your Home Network router.
I cannot find my Home Network when scanning for wireless networks in the Smart Setup Wizard.
  1. The Smart Repeater may be out of range. Move the Smart Repeater closer towards the wireless router and try the Setup Wizard again from the Web Menu.
  2. The Home Network may be a dual band wireless router. The Smart Repeater supports 802.11b/g/n 2.4GHz routers. If your Home Network uses a dual-band router, it will not work with the Smart Repeater. Adjust the dual-band router's configuration to disable the 5GHz band.
  3. Go to the Smart Features tab in the web menu and access the Wireless Coverage Controls. Make sure the setting is at 100% and try again.
  4. Make sure that your Home Network's wireless SSID is broadcasting and not hidden.
My Smart Repeater was working fine previously but now I can no longer access the Internet through the Smart Repeater.
  1. The connection to your Home Network has been dropped. This can be caused by several events to your home wireless connection. When this occurs you may rescan for another network by accessing http://setup.ampedwireless.com to connect to and repeat or you may try to fix the issues with your Home Network and your home wireless router.
  2. If you cannot access the setup menu, check to see that your Smart Repeater is still on. Reboot the Smart Repeater by unplugging the power adapter and plugging it back in. Check to see if your connection has been reestablished by viewing a website. If you do not have a connection, logon to http://setup.ampedwireless.com and configure a new Home Network connection.
  3. Check to see that your home wireless router is still on. If it has been turned off please turn it back on. The Smart Repeater should automatically reconnect to your Home Network within 10 minutes.
  4. Check to see that your home wireless router settings have not changed. Any changes to the SSID, security, or channel number from the original settings will disconnect the Smart Repeater's connection to the home network. If you are not sure which settings have been changed, simply run the Smart Setup Wizard again from the web menu and reconfigure your Home Network connection.
I have a dual-band router and I cannot repeat it.
  1. Log into the Web Menu for your dual-band wireless router and adjust the wireless settings. Change the wireless band to 2.4GHz single band mode only. Disable the 5GHz wireless band
I cannot find any wireless networks (Home Networks) to repeat.
  1. The Smart Repeater may be out of range. Move the Smart Repeater closer towards the wireless router and try the Setup Wizard again from the Web Menu.
  2. The antenna on your Smart Repeater may be loose. Tighten the antenna connection and try again.
  3. The wireless Home Network may not be a compatible wireless network (802.11b/g/n).
I am connected to a Home Network however I do not have Internet Access.
  1. The Home Network itself may not have Internet access. Check to see that you have internet access by connecting directly to the Home Network first. If you are able to go online then this is not a problem. If you cannot go online, then the Home Network's Internet connection must first be resolved.
  2. You may have a DNS issue and the Smart Repeater is not obtaining the IP settings from your Home Network. Try to reboot the Smart Repeater and then accessing a website. If that fails, then reboot the Home Router to see if that fixes it.
  3. There may be an IP conflict with your Home Network and your Extended Network. Try to adjust the IP Settings of your Extended Network using IP values that are different from your Home Network.
I can no longer connect to the Smart Repeater wirelessly.
  1. Power on and off the Smart Repeater and try again.
  2. The connection to the Home Network may be down. Use an Ethernet cable and connect directly to the Smart Repeater. Access http://setup.ampedwireless.com and run through the Smart Setup Wizard again. After you have successfully reset the Home Network connection, try connecting wirelessly again.
I could NEVER log onto the Smart Repeater wirelessly.
  1. Check that your wireless adapter supports WPA2 wireless security. If it does not then you will need to change the wireless security on the Smart Repeater. Go to the Web Menu, select Wireless Settings and then Wireless Security. Select the Extended Network from the drop down menu and either disable security or downgrade the security to WEP. Try connecting again.
  2. The connection to the Home Network may be down. Use an Ethernet cable and connect directly to the Smart Repeater. Access http://setup.ampedwireless.com and run through the Smart Setup Wizard again. After you have successfully reset the Home Network connection, try connecting wirelessly again.
I can no longer access the Web Menu or the Smart Repeater no longer responds.
  1. Connect to your Smart Repeater and try to access http://setup.ampedwireless.com using your web browser.
  2. If you are advanced in networking troubleshooting, log onto your home router's web interface. Look for the DHCP client list and try to find the IP address of your Smart Repeater assigned by your home router. Once you have it, connect to the Smart Repeater using an Ethernet cable. Open your web browser and enter the IP address into the address bar.
  3. Reset the Smart Repeater back to default settings and try the Smart Setup Wizard again. To reset the Repeater back to default settings, push the Reset Button (on the back panel) down for five (5) to ten (10) seconds then let go. After the Smart Repeater has fully reset, use an Ethernet cable and connect to the Smart Repeater. Login to the Web Menu at http://setup.ampedwireless.com and run through the Wizard.
The connection to the Home Network seems slow. File transfers take a long time to transfer.
  1. You may be too far away from your Home Network. The closer the Smart Repeater is to your Home Network, the better its connection will be. The Smart Repeater must have a strong signal in order to repeat the signal with fast speeds and further range. Move the Smart Repeater closer to your Home Network and try again.
  2. You may be downloading from the Internet and not within your Home Network or Extended Network. Files transferred through the Internet are limited by your ISP speed and the data download speeds from the website that you are downloading from.
  3. Your computer may be using an older Wi-Fi adapter with lower speed limits (802.11b/g)
The range from the Smart Repeater seems low.
  1. Check to see that your wireless output settings are at 100%. Go to the Web Menu, Wireless Settings and check the Advanced Settings. Make sure the output power is at 100%
  2. Your Smart Repeater may be installed in a poor location. Avoid setting up your Smart Repeater in areas with high interference, such as, near fridges, microwaves, metallic objects and low surfaces. Install the Smart Repeater in a higher location if possible.
  3. Check the connections of the Antennas to the Smart Repeater. Tighten them if necessary.
  4. Adjust the Antennas of the Smart Repeater in different angles.
The connection to the Home Network seems slow. File transfers take a long time to transfer.
  1. You may be too far away from your Home Network. The closer the Smart Repeater is to your Home Network, the better its connection will be. The Smart Repeater must have a strong signal in order to repeat the signal with fast speeds and further range. Move the Smart Repeater closer to your Home Network and try again.
  2. You may be downloading from the Internet and not within your Home Network or Extended Network. Files transferred through the Internet are limited by your ISP speed and the data download speeds from the website that you are downloading from.
  3. Your computer may be using an older Wi-Fi adapter with lower speed limits (802.11b/g)
My Wireless Access Schedule is being erratic and not working at the correct times.
  1. You need to adjust your Time Zone Settings from the Management Web Menu page.
WiFi Protected Setup (WPS) is not working. Push button configuration does not detect the connection.
  1. The Smart Repeater supports WPS connections however some companies may use proprietary code for their own push button configurations. Try connecting using the Windows wireless utility or Mac wireless utility instead.
 
Watch Video
 
 
 
chat