Amped Wireless AP300 High Power Wireless-300N Smart Access Point Support Page
Product Support
High Power Wireless-300N Smart Access Point (AP300)

High Power Wireless-300N
Smart Access Point
AP300

Add Long Range Wireless to an Existing Network

Browse the selections below to view support materials and
troubleshooting tips. FAQs provide you with answers to frequently
asked questions. The Download section provides you with firmware
upgrades or device drivers and other related software. To view the
User's Guide for your product check out the Documentation section.
If you are having problems finding what you need, contact us.

 
Items
Date
Setup Guide Setup Guide 6/13/2011
User's Guide User's Guide 6/13/2011
Datasheet Datasheet 6/13/2011
 
Items
Notes
Date
Firmware Firmware Download and unzip. View Read Me.txt 12/12/2012
   
Recent Updates
  • Added stability for Apple AirPrint, AirPlay and Home Sharing
  • Fixed Internet Explorer 10 and Safari touch screen button errors.
 
Troubleshooting

The tips in this guide are listed in order of relevance. Try solution (a) before trying solution (b), etc.
  1. Make sure your computer is connected to the Smart Access Point wirelessly and NOT using a network cable. Ensure
    the power is plugged in and on. Try to access the setup menu again.
  2. Enter the following web address into your web browser instead of ‘setup.ampedwireless.com’: http://192.168.1.240
  3. Power off (unplug the power adapter) the Smart Access Point and power it back on. Try again.
  4. Reset your Smart Access Point to default settings by holding the Reset Button (located on the back panel) for ten (10)
    seconds and try again.
  1. Your router or original network may not have Internet access. First check to see if you are able to access the Internet by connecting directly with your router. If you cannot, there is a problem with your router that needs to be fixed first. If you are able to access the internet, continue with the following troubleshooting options below.
  2. Your router may be using Static IP assignments. If so, you will need to configure a Static IP for the Smart Access Point. Connect your PC to the Smart Access Point using an Ethernet cable. Disconnect your PC from any wireless networks that it may be connected to. Access the web menu at setup.ampedwireless.com using a web browser. Access the IP settings menu from the left hand navigation bar. Select 'Disable' under the DHCP dropdown menu and enter an IP address that matches your router's IP settings.
  3. Detach the Smart Access Point from your router and reset it back to default settings by holding down the reset button (red circle) on the back panel of the Smart Access Point for 5-10 seconds. After it has reset, reattach it to your router's network port. Allow up to 2 minutes for the Smart Access Point to reconfigure itself to your network and attempt to access the Internet through the Smart Access Point's wired or wireless network.
  1. The settings on your router's network may have changed or you may have lost internet connection on your home router. Any changes to the DHCP settings of your home router may affect the internet connection of the Smart Access Point. Check the settings on your router and try again.
  2. Reboot the Smart Access Point by unplugging the power adapter and plugging it back in. Allow up to 2 minutes for the Smart Access Point to reconfigure itself to your network. Check to see if your connection has been reestablished by viewing a website.
  1. Double check that you are connected to the Smart Access Point and not to your home router. Use an Ethernet cable and attach it between your computer and the Smart Access Point. Disconnect your computer from all wireless networks and try to access the web menu again.
  2. If you are advanced in networking troubleshooting, log onto your home router's web interface. Look for the DHCP client list and try to find the IP address of your Smart Access Point assigned by your home router. Once you have it, connect to the Smart Access Point using an Ethernet cable. Open your web browser and enter the IP address into the address bar.
  3. Reset the Smart Access Point back to default settings and try the Smart Setup Wizard again. To reset the Access Point back to default settings, hold the Reset Button (on the back panel) down for five (5) to ten (10) seconds. After the Smart Access Point has fully reset, use an Ethernet cable and connect to the Smart Access Point. Log in to the Web Menu at http://setup.ampedwireless.com and reconfigure the settings for your Smart Access Point.
  1. You may be too far away from the wireless network. Wireless data transfer speeds degrade as distances increase between your computer and the Smart Access Point.
  2. You may be downloading from the Internet and not within your local network. Files transferred through the Internet are limited by your ISP speed and the data download speeds from the website that you are downloading from.
  3. Your computer may be using an older Wi-Fi adapter with lower speed limits (802.11b/g).
  4. You may have interference on the wireless channel that the Smart Access Point is currently using. Try changing the channel of your wireless network.
  1. Check to see that your wireless output settings are at 100%. Go to the Web Menu, Wireless Settings and check the Advanced Settings. Make sure the output power is at 100%.
  2. Your Smart Access Point may be installed in a poor location. Avoid setting up your Smart Access Point in areas with high interference, such as, near fridges, microwaves, metallic objects and low surfaces. Install the Smart Access Point in a higher location if possible.
  3. Check the connections of the Antennas to the Smart Access Point. Tighten them if necessary.
  4. Adjust the Antennas of the Smart Access Point in different angles.
  1. You need to adjust your Time Zone Settings from the Management Web Menu page.
  1. The Smart Access Point supports WPS connections, however, some companies may use proprietary code for their own push button configurations. Try connecting using the Windows wireless utility or Mac wireless utility instead.
 
Coming Soon...
 

Product Registration

Product Registration Database Currently Under Maintianance
 
 

chat